1×4 HDMI FULL HD SEAMLESS QUAD SPLITTER
 
CYPRESS
 
"This HDMI Video Wall Controller allows a single HDMI source to be displayed on up to 4 HDMI displays (TV or monitor) and/or cascade to additional units to extend the number of displays in the video wall configuration. The user-friendly PC control application allows full control over single or multiple devices in a Video Wall control system, including picture adjustment and full bezel correction. It supports video resolutions up to WUXGA@60Hz (RB) and 1080p@60Hz, audio formats up to 7.1CH LPCM at 192kHz sampling rate dependent upon the source devices resolution capabilities. All operation and control can be done via IP (Telnet/PC application) and RS-232 commands.
Note: Please always uninstall/remove the old version of the TV Wall Set software application, before installing the new version."
 
HDMI, HDCP1.1 and DVI compliant
Output a single source image to 4 displays (in a 2 by 2 Video Wall configuration) with adjustable Bezel Correction
Cascade/Bypass the HDMI signal up to as many units as required, increasing the number of displays in the MxN Video Wall
Supports Input resolutions of VGA~WUXGA and 480i~1080p
Supports IP (Telnet/PC Application) and RS-232 control
Supports Output resolutions 720p@50/60Hz, 1080p@50/60Hz and several PC timings
Supports different input resolutions and output resolutions selectable using PC application (Factory default settings of the output signal are 720p@60Hz video and LPCM 2CH audio)
Supports pass-through of audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio